Speed Control Controller Variable Motor 200W 220V / US-52

Scope of Application:

Widely used for speed regulation of 200W, AC220V single-phase stepless AC speed controllers (not suitable for ordinary speed regulation motors). Additionally, there are four types of wiring ports for the speed controller. When customers take photos, they need to inform us about the power of the motor they are equipped with, so we can accurately select and send it!

Main Technical Data:

1. Operating Power Supply: AC220V 50/60HZ, voltage fluctuation range +/-10% Ue
2. Rated Power: 200W
3. Operating Environment: -10 ~ +50 ℃
4. Relative Humidity less than 90%
5. Speed Range: 90-1400r/min at 50HZ, 90-1700r/min at 60HZ

Three Usage Instructions:

1. Before use, set the external speed knob to "0" to avoid generating a momentary high current and damaging the controller.
2. This series of products adopts generator feedback voltage control, with control lines divided into two lines: "blue" and "yellow".
3. If the torque or speed of the speed controller connected to the motor does not meet the requirements, adjust the US-52 type side micro potentiometer.
4. To change the motor's operating direction: 1) select the short circuit between COM and CW, the motor will rotate forward. 2) If COM and CCW are shorted, the motor will reverse.
5. The operation switch only controls the motor to move or stop and is not used to cut off the power supply. If not used for a long time, please turn off the power.